Loading... Please wait...
  • 3M 6396 Automotive Adhesion Promoter, Sponge Applicator Packet

3M 6396 Automotive Adhesion Promoter, Sponge Applicator Packet

$2.95

Product Description

3M™ Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M™ Acrylic Foam Tapes for interior and exterior trim applications.

3M™ Adhesion Promoter 06396 is specifically formulated to be used with 3M™ Acrylic Foam Tape for automotive applications. 06396 is often used with low-surface energy plastics such as TPO, PPO, PP, PC, PC + ABS, etc.). Since formulations and surface energies can vary for these types of materials, each application should be verified through testing. 06396 is supplied in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Apply promoter only to the areas that will be fully covered with tape. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primed surfaces remains free from contaminants prior to tape application.

 

Application Procedure:

3M™ Adhesion Promoter 06396 is supplied in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Hold packet upright and avoid squeezing an opened packet to prevent spillage of liquid contents. The packet can be opened by tearing across the top of the packet at the notches. This will expose the sponge applicator. Do not remove the sponge or squeeze a freshly opened packet. Handling the bottom section of the packet should enable application of 3M adhesion promoter 06396 with no mess. Apply a thin, uniform coating to the bonding surface, using the minimum amount that will fully coat the surface. A wet coating thickness of 0.002 inch or less ensures a good application. Although drying times may vary due to temperature and/or humidity, a drying time of 30-90 seconds results with a coating of this thickness. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primer surface remains free from contaminants prior to tape application.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
MMM/6396